Tianjin Tiansu Binhai Fluorine Plastic Film

Date:2021/4/7 7:51:34 /Read: /Source:本站

Tianjin Tiansu Binhai Fluorine Plastic Film http://www.tjtsjt.net//

Folding expanded sheet http://www.tjtsjt.net//

The high-sealing backing plate made by PTFE expansion does not contain any adhesives and additives. It has strong resistance to chemical corrosion; the special design makes the backing plate has a strong resistance to creep and cold flow, so as to ensure the stable maintenance of the bolt tightening force during the sealing process; it has good flexibility, compression resilience, and resistance High and low temperature, non-aging, self-lubricating, etc.; soft and easy to cut, can be cut by machine or hand, easy to install; with unique conformable forming ability, no need to increase the pressing force, greatly extending the service life of the flange. Make up for irregularities in the sealing surface, reliable sealing performance, especially excellent gas sealing performance. http://www.tjtsjt.net//

Appearance color: white. http://www.tjtsjt.net//

Applicable temperature: -180-250 http://www.tjtsjt.net//

Applicable medium: PH 0-14 http://www.tjtsjt.net//

Regular size: 1500mm*1500mm thick 1.5-3mm http://www.tjtsjt.net//

The user can buy the whole piece and cut it into gaskets according to the caliber of the flange of their own equipment, or they can put forward their own requirements and preform them by the supplier. http://www.tjtsjt.net//

Folding modified sheet http://www.tjtsjt.net//

It is made by using inorganic substances as fillers and evenly dissolving them into polytetrafluoroethylene raw materials for further processing. http://www.tjtsjt.net//

Compared with pure PTFE, modified PTFE has the advantages of higher compressive strength, wear resistance, good thermal conductivity, and reduced thermal expansion; the internal multi-directional fiber structure makes this product highly resistant to chemical corrosion , There is no cold flow and creep phenomenon, and it can maintain a reliable seal for a long time. http://www.tjtsjt.net//

The pad filler is an inorganic substance, does not contain any adhesive, does not adhere to the sealing surface, and is used repeatedly on the same sealing surface. Easy to cut, can be cut by machine or hand, easy to install. There is no aging problem and can be stored for a long time. http://www.tjtsjt.net//

Appearance color: white or blue http://www.tjtsjt.net//

Applicable temperature: -180-250 http://www.tjtsjt.net//

Applicable medium: PH 0-14 http://www.tjtsjt.net//

Regular size: 1524mm*1524mm thickness 1.5-8mm http://www.tjtsjt.net//

The user can buy the whole piece and cut it into gaskets according to the caliber of the flange of their own equipment, or they can put forward their own requirements and preform them by the supplier. http://www.tjtsjt.net//

Taken from the network http://www.tjtsjt.net//

Editor:admin


Calling Now 022-23395972 OR See More Contacts →

Go To Top